DESCRIPTION
ERBIOCIDE-FW protects cooling water systems from bacteria, fungus, mold, oyster, mussel and etc. by destroying their cells. As the organisms try to refresh their selves ERBIOCIDE-FW acts as emery and blocks their growing. A very thin layer of dead organisms forms in the system after usage, which will protect the cooling systems from contamination generating from the sea.
APPLICATION, FEATURES & BENEFITS
- It minimizes the biological contamination and abrasion (corrosion). Thus the output and life of the system prolongs.
- It keeps the heat transfer performance at maximum so the output is high.
- It decreases the maintenance and breakdown cost and continuous supervision and cost thereof.
- It’s easy to perform and has low cost.
DIRECTIONS FOR USE/ APPLICATION RATES AND DOSAGE RATES
If your system is contaminated with shelled organisms, a pre-cleaning is recommended before starting ERBIOCIDE-FW usage, otherwise ERBIOCIDE-FW will start to kill shelled organisms rapidly and these dead shells will block cooling blocks.
ERBIOCIDE-FW must be added as 1 Kg to 100 tons at least once in 2-3 days in coastal waters and at least once in 6-7 days in open sea (10 g/ton). Dosage should be made gradually in 2 hours with a dosage pump. The best injection place of ERBIOCIDE-FW is just after seachest. In such an application, the product will penetrate into all parts of the sea water system.
