HIGH PRESSURE WATER BLASTER 350 BAR 3X400 / 50HZ - 3X440 / 60HZ HyperJet 350 is a professional high pressure Water blaster, designed and manufactured for use under the toughest conditions. Stainless steel frame with [...]
HIGH PRESSURE WATER BLASTER 500 BAR HyperJet 500 Plus is a professional high pressure water blaster, designed and manufactured for use under the toughest conditions. Stainless steel frame with stainless steel cover. Easy [...]
COMPATIBILITY/ STABILITY TEST is a modified version of the ASTM D4740-94 method. The test methods list two separate procedures for predicting stability of residual fuel oil and the compatibility of residual fuel oil with [...]
Ø Lab Grade Methanol (2.5 ltr glass bottle) Ø Lab Grade D.I. Water (2 ltr glass bottle) Ø Potassium Permanganate Crystals (0.1 gram- 6 pcs) Ø Chloride Standard Solution (30 ml-2 pcs) Ø Sulphuric [...]
Sulfite (SO3-2) Test Kit for Water (Sensitivity:1 drop iodur/iodat solution is equal to 0,5 mg/l) 1) Rinse the test tube with the water to be tested and fill to the 5 ml mark using [...]
HARDNESS TEST: Total Hardness Method: 1) Rinse the test tube with the water to be tested. And fill to the 5 ml mark. 2) Add 2 drops MB Indicator (Eriochrome Black T), place the [...]
Total Hardness Method 1) Rinse the test tube with the water to be tested. And fill to the 5 ml mark. 2) Add 2 drops MB Indicator (Eriochrome Black T), place the stopper and [...]
Nitrite Test Method 1.Remove only as many test strips as are required. Close the container immediately after removing a strip. Do not touch the test field. 2.Dip the test strip into the test solution [...]
Chloride (Sensitivity 1 drop = 30 mg/l (ppm)) Method : 1) Rinse the test tube with the water to be tested and fill it using 5 ml injector. 2) Add 3 drops Chloride Indicator [...]
Chlorine Test Kits for Water (Sens.Chlorine 0,1 to 3,0 ppm) Rinse the test tube with the water to be tested. Add 4 drops “chlorine indicator” and shake it well. Compare the yellow color to [...]
