DESCRIPTION
ERBIOCIDE-A is a biocide which prevents the system from algae, bacteria, fungus, mold, oyster, moss and the contamination they cause. It has a wide usage area like paper industry textile industry, paint and surface insulation products, industrial cooling water towers fuel-oil industries and disinfectants.
APPLICATION, FEATURES & BENEFITS
- It minimizes the biological contamination and abrasion (corrosion). Thus the output and life of the system prolongs.
- It keeps the heat transfer performance at maximum so the output is high.
- It decreases the maintenance and breakdown cost and continuous supervision and cost thereof.
- It’s easy to perform and has low cost.
DIRECTIONS FOR USE/ APPLICATION RATES AND DOSAGE RATES
If your system is contaminated with shelled organisms, a pre-cleaning is recommended before starting ERBIOCIDE A usage. Otherwise, ERBIOCIDE A will start to kill shelled organisms rapidly and those dead shells will block cooling blocks.
In the systems where bacterial presence is high shock application of ERBIOCIDE A is advised in order to clean and control the system. Shock application is performed as 0,05%, for example 50 kg for 100 ton of water, 1-4 times a week and must be repeated until the system is taken under control. Than the dosage must be applied as 20 – 100 g/ton water ( 2-10 Kg for 100 ton water ). The best dosage place for ERBIOCIDE A is just after the seachest.
